HAND FILES
![[SEV*CAL]](sevcl3.gif)
CARBIDE HAND FILES ARE IDEAL FOR USE ON HARD MATERIALSWHICH QUICKLY DULL
ORDINARY STEEL FILES. THE ARE AVAILABLE IN SEVERAL SIZES, STYLES, CUTS AND TOOTH PATTERNS TO MEET ALMOST ANY APPLICATION
REQUIREMENTS. CARBIDE FILES ARE STOCKED IN COURSE, MEDIUM, AND FINE CUTS, AND IN STANDARD TOOTH PATTERN. OTHER CUTS AND
PATTERNS CAN BE SUPPLIED PROMPTLY TO ORDER. CAN REGRIND DULL FILES TO PROVIDE
EXCEPTIONAL SERCVICE LIFE.
STEEL- TOUGH, FATUGUE-RESISTANT SELECT GRADE OF MOLYBDENUM STEEL. HEAT
TREATED BEFORE FINAL GRINDING TO PROVIDE THA OPTIMUM COMBINATION OF PROPERTIES FOR HIGH PERFORMANCE. STEEL FILES WILL PRODUCE
THE SAME TYPE OF CUTTING ACTION AS OUR CARBIIDE FILES AND ARE IDEAL FOR "MEDIUM" MATERIALS WHERE CHIPPING MIGHT OCCUR USING
CARBIDE FILES ON A INTERRUPTED CUT. STEEL FILES MAY ALSO BE REGROUND FOR NEW TOOL LIFE.
CARBIDE FJ STYLE
CUT AREA 3/4 X 6
| TOOL NO. |
CUT |
TEETH PER INCH |
| FJ-3-W |
FINE |
40 |
| FJ-4-W |
MED. FINE |
31 |
| FJ-5-W |
MEDIUM |
25 |
| FJ-6-W |
MED. COARSE |
20 |
| FJ-7-W |
COARSE |
16 |
STEEL FJ STYLE
CUT AREA 3/4 X 6
| TOOL NO. |
CUT |
TEETH PER INCH |
| FJ-3-S |
FINE |
40 |
| FJ-4-S |
MED. FINE |
31 |
| FJ-5-S |
MEDIUM |
25 |
| FJ-6-S |
MED. COARSE |
20 |
| FJ-7-S |
COARSE |
16 |
CARBIDE FE STYLE
CUT AREA 3/8 X 1-1/2
| TOOL NO. |
CUT |
TEETH PER INCH |
| FE-1-W |
FINE |
62 |
| FE-2-W |
MED. FINE |
50 |
| FE-3-W |
MEDIUM |
40 |
| FE-4-W |
MED. COARSE |
31 |
STEEL FE STYLE
CUT AREA 3/8 X 1-1/2
| TOOL NO. |
CUT |
TEETH PER INCH |
| FE-1-S |
FINE |
62 |
| FE-2-S |
MED. FINE |
50 |
| FE-3-S |
MEDIUM |
40 |
| FE-4-S |
MED. COARSE |
31 |
CARBIDE FZ-K STYLE
CUT AREA 3/4 X 3
| TOOL NO. |
CUT |
TEETH PER INCH |
| FJ-3-K-W |
FINE |
40 |
| FJ-4-K-W |
MED. FINE |
31 |
| FJ-5-K-W |
MEDIUM |
25 |
| FJ-6-K-W |
MED. COARSE |
20 |
STEEL FZ-K STYLE
CUT AREA 3/4 X 3
| TOOL NO. |
CUT |
TEETH PER INCH |
| FJ-3-K-S |
FINE |
40 |
| FJ-4-K-S |
MED. FINE |
31 |
| FJ-5-K-S |
MEDIUM |
25 |
| FJ-6-K-S |
MED. COARSE |
20 |